Deer Hunting Forums banner
1 - 15 of 15 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
I have heard many comments and saw a TV show on I think Discovery Channel about problems with Remington. Seems there have been many incedents with them going off unexpectedly. the show showed them going off when opening the bolt. some even went off coming off safety. seems to be so much problem the military quit using them. Has anyone had any experience with it, or other info. I have been hunting with a 30-30 with some success but a friend keeps trying to get me to use his Remington. After that TV show I'm really sort of afraid of it. Any input is welcomed.
Charlie
 

·
Premium Member
Joined
·
3,942 Posts
There was a recall posted here a couple years ago about the Remington 700's or 710's. I can't really recall all that much.
 

·
Registered
Joined
·
8,459 Posts
There may be something to the remington issue, however, I firmly believe there's no better rifle for the money than a Rem 700. I saw the same documentary and don't know fact from fiction?
 

·
Registered
Joined
·
824 Posts
I have been hunting with a 30-30 with some success but a friend keeps trying to get me to use his Remington. After that TV show I'm really sort of afraid of it. Any input is welcomed.

For one thing, what model Remington does your friend have? I have two Remingtons that are semi-auto's, both of them as old or older than I am. Have used them both successfully since having them handed down from my grandfather. Evidently the issue is with some of their Model 710 bolt actions. All I can say is go to the Remington website and put in the serial number in question. They can tell you if it is affected by their recall or not.

Remington also has recalls on some of their ammo. Go to their website for the details.

Safety Center - Safety Programs - Safety Notices - Hunting Safety

Don't take my word for it, go to the horse's mouth . . . .

RR
 

·
Registered
Joined
·
602 Posts
The Rem 700 & 710's problems are not the same ones. The M700's safety issues date way back to when that rifle first debuted (1962, I believe). Back then, the M700 could NOT be loaded or unloaded with the safety in the SAFE position. A person needed to both load & unload with the safety in the OFF position, thus increasing monumentally the opportunity for a problem, mistake, mechanical failure, accident or trajedy occurring.

The main issue is two-fold; is the safety/fire mechanism perfect in it's function and could it be "tricked" into dropping the firing pin (firing) when the safety is simply placed to OFF? I would recommend that people interested in this issue also do some research on the Remington M600s & 660s. I have owned both and learned a lot in doing so.

The safety/fire system of these three models is identical. The Models 600 & 660 only lasted a few years as factory offered Remington models. About the same time they "left", Remington also redesigned their safety on the M700 to be able to be left ON or SAFE when the bolt was opened, thus allowing all loading and unloading to be done with the safety engaged or ON.

This simple change caused the number of accidents to go down and logically so. There were literally millions of times now that guns were loaded & unloaded with the safety ON rather then OFF.

I said I owned both a M600 & 660. With my 660 in .308 there actually was a classic occurrence of unintended firing from that rifle. The result? The gun fired into the ground, as one would hope, due to safe handling practices. That gun was being unloaded by the person who is the safest gun handler I know, my Dad. He finished unloading that rifle, handed it back to me and never touched it again. His finger was nowhere near the trigger, when the safety was pushed to off and the rifle simply fired (as many others have claimed). Actually, his trigger finger was on the safety when the rifle fired!

What did I do with that rifle? I researched it (this was the early '80s) and found that Remington would replace the safety (by recall) for free. It was replaced and then I ended up selling that rifle. That recall is STILL in effect now.

There are lots of other rifles that still need to be placed off safe when loaded and unloaded, but you do not hear of these troubles from them. In my opinion, there is a flaw in the safety/fire system adopted way back when. They had a chance to change it & improve it and they did not. Remingtons no longer have this same system.
 

·
Registered
Joined
·
608 Posts
Yes in 1964 I had my Model 600 recalled for that exact problem. They replaced the entire trigger assembly and I still have my 600 which cost 99$
and a 1.5X5 leupold 111 for 99 bucks. It works just fine
daddus
 

·
Registered
Joined
·
852 Posts
Thanks for the video...

I have found myself defending the M700 against those that saw the original piece about how dangerious it was. I didn't belief it at the time and always figured it was one that had been modified. Atleast now I can redirect anyone that mentions it to the youtube site for this video.

Thanks again

Karl
 

·
Registered
Joined
·
799 Posts
I got a 700 back in 91 and have had absolutely no problems with at all. Its a sweet shooting rifle.
 

·
Registered
Joined
·
27 Posts
Discussion Starter · #14 ·
Thanks

I would like to thank everyone who responded to my question about Remington Rifles. The video Remington Under Fire was very informative.
Thanks again,
Charlie
 

·
Registered
Joined
·
27 Posts
Discussion Starter · #15 ·
Thanks to everyone

I want to thank everyone who posted replies. The replies from Remington were interesting but I especially appreciated the personal experiences. those you can bet are not to gain TV ratings or cover up a manufacturing problem. Again, thanks everyone.
Charlie:coffee:
 
1 - 15 of 15 Posts
Top