Deer Hunting Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
221 Posts
Discussion Starter · #1 ·
Hey, I was wondering what size vanes you guys would suggest I should use. Low profile or high profile. 1,2,3, or 4 in. vanes. Have any thoughts please let me know.:yes:
 

·
Registered
Joined
·
221 Posts
Discussion Starter · #6 ·
Thanks guys!! I use the Carbon Express Lung Busters and F-15 expandable. So 2 inch for fixed blades and 4 inch for the mechanicals. Thanks!!
 

·
Registered
Joined
·
8,461 Posts
Historically speaking, you need to reverse that. 2" for mech's, and 4" for fixed. However, as stated I shoot 2" vanes with fixed blades and shoot a lot tighter groups now. Equipment advances has thrown most older thoughts right out the window. It would be a good idea to fletch 1/2 doz of each and see which ones fly the best with a specific broadhead.
 

·
Registered
Joined
·
602 Posts
Historically speaking, you need to reverse that. 2" for mech's, and 4" for fixed. However, as stated I shoot 2" vanes with fixed blades and shoot a lot tighter groups now. Equipment advances has thrown most older thoughts right out the window. It would be a good idea to fletch 1/2 doz of each and see which ones fly the best with a specific broadhead.
x2 that is what i did.
 

·
Premium Member
Joined
·
3,347 Posts
2" Blazers & NAP quickspin w/ my Rage
started w/ the 4" & as HM stated I also got tighter groups w/ the 2"
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top