Deer Hunting Forums

Deer Hunting Forums (https://www.deerhuntersclub.com/forums/)
-   Reloading (https://www.deerhuntersclub.com/forums/reloading/)
-   -   Just starting up. (https://www.deerhuntersclub.com/forums/reloading/6867-just-starting-up.html)

NELA 11-28-2010 01:01 PM

Just starting up.
 
Hey fellas, new to the forum and seeking advice. I have had a starter reloading kit for several years that is still in the box. I have finally made room to set it up and thought maybe this would be a good place to start looking for load data to use as a starting point. I have a speer reloading manual but thought maybe someone would have some tips that would save time and money for a beginner. Some of the cartridges I will be reloading in the near future are 300WSM, 300 WBY mag, .243 win, and 7mm-08. Anybody got any words of wisdom?:confused:

WisconsinDeer 12-04-2010 10:58 PM

This probably isn't the best place to ask reloading questions...:unsure:

Hunting Man 12-05-2010 05:24 AM

WD, I thought he was in the right forum?? I too will be starting up reloading, kinda late in life but something I've wanted to do.

WisconsinDeer 12-05-2010 09:59 AM

Quote:

Originally Posted by Hunting Man (Post 49931)
WD, I thought he was in the right forum?? I too will be starting up reloading, kinda late in life but something I've wanted to do.

Yes..but..he posted 7 days ago and has only gotten 2 responses, one being mine.

Hunting Man 12-05-2010 07:55 PM

ok, wasn't sure. I know I'm going to be asking questions and hopefully someone out there has the answers.

tbighunter 12-11-2010 08:46 PM

I have reloaded shotgun and pistol many years ago.I just received my new Lee Loadmaster in .270 and I also was hoping to get some good advice from here also.I am confident that someone will step up and give us some advice.

WisconsinDeer 12-11-2010 09:05 PM

Quote:

Originally Posted by tbighunter (Post 50604)
I have reloaded shotgun and pistol many years ago.I just received my new Lee Loadmaster in .270 and I also was hoping to get some good advice from here also.I am confident that someone will step up and give us some advice.

I started loading for .243, 303 british and 7.62x54R back in August. Just go slow and watch what you are doing. Once you get the hang of reloading its a pretty fun hobby.

Is this the press you have? Looks like it has some pretty poor reviews.... Lee Load-Master Progressive Press Kit 270 Winchester - MidwayUSA

tbighunter 12-11-2010 09:21 PM

Yes,that is the press I have.I am not to concerned with the reviews.I have used Lee in the past with very good results.If it gives me trouble,I will return it if needed.I am at first not going to trust the automatic powder drop until I trust it.I think it will be fun to reload rifle.It not a Dillion or a RCBS but I hope as a starter,it will work.

WisconsinDeer 12-11-2010 09:42 PM

I don't know...every single one of those loadmaster press's has 1-2 stars.

This looks like a real good set for the money, especially for starting out.
Lee Challenger Breech Lock Single Stage Press Kit - MidwayUSA

tbighunter 12-11-2010 10:31 PM

I read the reviews,but the reviews don't mean that much to me.I have read lots of reviews on most of the things I purchase.If you do that,just about everything you want to buy,someone has a problem with it.

WisconsinDeer 12-11-2010 11:02 PM

I always read reviews before I buy something. But if 98% of the reviews are 1 star...then I would bet that its not worth the box it came in. Once you get it set up tell me how it runs...I hope it works out for you.

Karl.Luhr 12-17-2010 11:01 PM

Buy a reloading manual and read it...
 
I recommend that you visit a couple of gunshops in your area and check out their reloading manuals. All the major manuals have a couple of chapters on how to reload. Some are written better than others. Compare in the store and bring one home. The most important thing is ask while you are in the store if they offer free classes/seminars in reloading. I have several gunshops that I know of that offer the classes a couple of times a year because it makes sense to show shooters how easy it is to load your own. I have taught a half dozen shooters to reload and it was fun for both them and me while I was doing it. Two things I like to instill in new reloaders is that it is something that you need to be not distracted while you do it. Watching football or nascar while you load is in my opinion a bad idea. The other is if you want to load hotter than the factory loads ammo you can get into trouble. Manuals are conservative, that is a good thing. Some rifles/pistols may have a tight chamber or bore. This will cause the pressure to be higher than what they saw with the test fixture. Expect to load accurate ammo that provides similar velocity to the ammo you can get loaded from the factory. The new Superformance ammo is not reproduceable without getting the special powder not available to reloaders. I like basic single stage presses, they can be either c type or o type. I think that all reloaders need a beam scale to accurately verify their powder charge. I also think you need a powder measure so that you don't need to weight every powder charge, it really slows up the process.

Karl

dunitall 12-28-2010 08:28 AM

I started reloading about two months ago and have a lee turret four hole loader kit and load 270 win. A good loader for the money but be sure to use there instructions and go slow. I also use a scale to check the auto loading powder charge and do it four or five times to make sure it is set and then check it about every ten loads to make sure it is still as it should be. It has been ok but i just do it for safety. get a good book for reloading and start out light and work up to the load you want.

Predator 02-20-2011 12:26 AM

I had a lee turret type press back when I started reloading, 1980ish. it was OK but I unloaded it after a very short time and got an RCBS rock chucker and still have that to this day. The problem I had with the turret type press was there was too much play in the turret when the ram was fully extended. I needed something more rock solid for full length resizing.
the concept of being able to have all your dies installed and preset was at the time a good one but, I just learned to deal with doing all my cases one process at a time. for straight wall cases there was the green machine, which was a multi station progressive loading system. which basically means, once set up, a cartridge with every pull of the handle.

WisconsinDeer 02-20-2011 11:47 AM

I use an RCBS JR press, its very solid.

ronn 03-12-2011 05:25 PM

I use black Hi Tempe
 
I use black Hi Temperature paint designed for BBQ's. As far as the factroy OD green that came on the ammo can, it burns off pretty quick after a few good hot fires. Mine started to rust after a few trips and that's when I went to the hi-Temp paint. If you're really worried about the paint my advice would be to run a couple good hot fire(s) through the stove in a open area to allow any paint to off-gas before you actually use it in a tent. If you're really worried just sand the paint off.

guppy11 05-16-2011 05:49 PM

Most lee equipment is cheaply made including the dies. Not to the closest specs. You get what you pay for. RCBS and Hornady make good equipment at reasonable prices. Read a manual and go slow. If you load magnum cartridges and for just your own rifle neck sizing is the way to go. It will extend brass life dramaticlly, but the brass can only be used in the gun it was originally shot in until it is full length sized again.

Karl.Luhr 05-19-2011 09:24 PM

A case trimmer is something that you will need...
 
I was re-reading these posts and noticed no one listed a case trimmer. If you load a case enough times probibly 4 or 5 you will need to trim it. The easiest way is with the rotary case trimmers. You will also need a micrometer to check the case before and after trimming. There is also a little tool that champhers the end of the case after trimming. Is sounds like you will be buys stuff forever but it will last a life time.

And it is fun...

Karl

Predator 05-29-2011 05:06 PM

Quote:

Originally Posted by Karl.Luhr (Post 56537)
I was re-reading these posts and noticed no one listed a case trimmer. If you load a case enough times probably 4 or 5 you will need to trim it. The easiest way is with the rotary case trimmers. You will also need a micrometer to check the case before and after trimming. There is also a little tool that champhers the end of the case after trimming. Is sounds like you will be buys stuff forever but it will last a life time.

And it is fun...

Karl

Karl.Luhr,
I know what you meant, but for those that are new to reloading, to reliably check your over all case length, you will need a vernier caliper, not a micrometer. except for special use requirements, micrometers are generally for measuring small components 1.5 " or less. a 6" vernier caliper is pretty much a standardly available instrument and can be had for a reasonable am out.

TexasRem700 10-05-2011 08:30 AM

Read a manual first! I use Hornady Bullets there for use the Hornady Manual. Then come up with questions you may have and ask them here. BE VERY PATCHIENT once you have the process down you can then tweak and have fun experimenting within the parameters set forth in the manuals. As for the press debate, I use a Hornady Single Stage press for all my rifle ammo. I also shoot comp pistol so go through about 500-1000 rounds a week in 40SW so I use a Dillon 550B for pistol. I used a Lee Turret press for years before the Dillon but for HANDGUN AMMO ONLY!!!!!!!!!

WisconsinDeer 10-13-2011 07:12 PM

Quote:

Originally Posted by guppy11 (Post 56435)
Most lee equipment is cheaply made including the dies. Not to the closest specs. You get what you pay for.

I have made some extremely accurate loads using Lee dies.

TexasRem700 10-13-2011 11:43 PM

I use have used lee handgun dies but once i switched to Dillon w/my Dillon press I have noticed a difference with a hand gun. Spend the extra $$$ and have Dies that will last a life time. Hornady, Redding, RCBS, Dillon.

Karl.Luhr 10-25-2011 07:57 PM

Single stage or turret press
 
I was at Cabellas the other day and saw the Redding turret press. I use the Ultra Mag from Redding and was impressed by the solid lock up on the Redding turret press. If I did as much pistol loading as I used to I would pick one up just for pistol.

Karl


All times are GMT -5. The time now is 12:48 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome