handloading - Deer Hunting Forums

Go Back   Deer Hunting Forums > General Forums > Rifle Hunting
Rifle Hunting Discuss Rifle Season topics

Reply
 
Thread Tools Display Modes
  #1 (permalink)  
Old 02-02-2008, 02:05 PM
ronn
Guest
 
Posts: n/a
Question handloading

Are there any handloaders out there? I've done quite a bit but I've picked up a new rifle. I got a .338 ultra mag and need a recipes for it. Or do you know of any good links?
Edit/Delete Message Reply With Quote
  #2 (permalink)  
Old 02-02-2008, 06:23 PM
onehorse's Avatar
onehorse onehorse is offline
B&C 140 Class
 
Join Date: Dec 2007
Location: Montana
Posts: 776
Default

I've just submitted an article to DeerHuntersClub.com entitled "Basic Handloading for Hunters". I hope it will help anyone who is thinking about starting to handload. It's got lots of info and tips. In the meantime, you might try the Hodgdon web site, www.hodgdon.com, as it has lots of info and load data listed by caliber and bullet weight. They list 36 loads for that caliber. Good luck!

Last edited by onehorse; 02-03-2008 at 08:50 AM.
Reply With Quote
  #3 (permalink)  
Old 02-02-2008, 07:10 PM
ronn
Guest
 
Posts: n/a
Default

Thanks onehorse, I'll check it out.
Edit/Delete Message Reply With Quote
  #4 (permalink)  
Old 02-02-2008, 11:17 PM
onehorse's Avatar
onehorse onehorse is offline
B&C 140 Class
 
Join Date: Dec 2007
Location: Montana
Posts: 776
Default

Quote:
Originally Posted by ronn View Post
Thanks onehorse, I'll check it out.
Good, ronn. Let me know how you like that site and how it works out for you.
Reply With Quote
  #5 (permalink)  
Old 02-03-2008, 07:21 AM
ronn
Guest
 
Posts: n/a
Default

Turns out I have been there. I go to IMR. Just always used DuPont IMR. When I did a lot of reloading it was for the 300 savage, 06, 7mm mag,257 bob, .338 win mag, 22 hornet, 22.250, 30.30, but then Hornady came out with there own ammo that was as good as I could build or was willing to. Without getting in to neck turning and weighing each piece of brass and doing all the things that make a round hyper accurate. With the ultra mags factory ammo is limited. I like trying to get the best out of the round and know there are guys out there that have played around and developed some excellent SAFE stuff. Like for the hornet I used lil gun( hodgdon) powder which is a shot gun powder for the 410. The first round over the corno was 3200 with a 35 gr v-max. and groups man they were very tight. A literal tack driver a 100. I whacked a crow at 270 paces cold shot. So I'm looking for those formulas that will get the best out of the round which in all likelihood aren't in the book. Got any thoughts? thanks again
Edit/Delete Message Reply With Quote
  #6 (permalink)  
Old 02-03-2008, 09:00 AM
onehorse's Avatar
onehorse onehorse is offline
B&C 140 Class
 
Join Date: Dec 2007
Location: Montana
Posts: 776
Default

ronn, sounds like you have LOTS of experience handloading. One powder that my friends and I like, especially for magnums, is H4350. It is close to and shoots like IMR 4350, but it's said by the manufacturer to be temperature resistant, so it shoots the same in any season. RL19 has always been a tack driver for us too. A brand new powder, which I haven't even been able to find yet, is Hybrid 100V. It's supposed to be very accurate and work very well in powder measures - runs through the measure consistently even. Keep in touch.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Top Posters
Hunting Man7637
buckfever5650
BruceBruce19595396
timberghost3909
joel the signman3608
tator3167
gfdeputy22794
delbert1492
Buckshot1219
hunt NH1203
Photos
Some rifle pics
turner
Some rifle pics
Team DHC Articles


    All times are GMT -5. The time now is 11:40 PM.



    LinkBacks Enabled by vBSEO 3.0.0 RC8