Seating Depths/Accuracy - Page 2 - Deer Hunting Forums

Go Back   Deer Hunting Forums > Other Hunting Topics > Reloading
Reloading Discuss Bullets, Powders, Pellets, Brass, etc.

Reply
 
Thread Tools Display Modes
  #11 (permalink)  
Old 11-02-2010, 09:27 AM
goose19726 goose19726 is offline
B&C 100 Class
 
Join Date: Oct 2010
Location: currently in oklahoma city, soon I will be moving to little axe oklahoma
Posts: 37
Default

when working up new loads, I usually just slightly over size a brass, making sure the brass length is at a standard and loosely seat a bullet, with no powder or primer, then I put this in the gun and close the action, the bullet hits the lands and is pushed backinto the brass, once removed from the gun I measure it and that gives me overall chamber length, and I work up a few loads with the only difference being the distance the bullet ogive has from the lands on the rifling. most of my loads in various gun usually wind up being about 30 thousanths off the lands, no overpressue issues and better accuracy. but every gun is different and so is every reloader

most of my work goes into brass prep and powder charge. I weigh each piece of brass and each bullet, looking for consistency, which I believe is the key to creating good groups
Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Top Posters
Hunting Man7562
buckfever5650
BruceBruce19595360
timberghost3886
joel the signman3608
tator3139
gfdeputy22745
delbert1489
Buckshot1219
hunt NH1203
Photos
Pictures from the past 2 hunting seasons...
extremehunter007
Pictures from the past 2 hunting seasons...
Team DHC Articles


    All times are GMT -5. The time now is 05:55 PM.



    LinkBacks Enabled by vBSEO 3.0.0 RC8