Deer Hunting Forums

Deer Hunting Forums (http://www.deerhuntersclub.com/forums/)
-   MuzzleLoader Hunting (http://www.deerhuntersclub.com/forums/muzzleloader-hunting/)
-   -   T/C Omega ? (http://www.deerhuntersclub.com/forums/muzzleloader-hunting/9983-t-c-omega.html)

Unregistered 09-09-2012 04:55 PM

T/C Omega ?
 
Should I float the barrel on my Omega 50cal, or is that just for centerfires?

Hunting Man 09-09-2012 07:59 PM

my omega shoots just fine without any changes. Unless you're having problems at the range I don't see where the need would be to.

midwestprowler 12-02-2012 11:59 PM

The Omega barrel should be free floated when you got it. Have you done the Dollar bill test this is what I'm talking about Gunsmithing - How to Free Float a Rifle Barrel Presented by Larry Potterfield of MidwayUSA - YouTube You will only be able to go back to the 1st lug then it should stop. If you have no resistance till that point you should be good. I do this every time I remove the stock & reassemble. Like HM said if it's not effecting the gun down range I would not worry about it.:thumbup:

frontiergander 12-03-2012 01:35 AM

You can actually use some shims cut from an aluminum pop can or thick plastic. If its not moving around or anything, i think you'd be fine.

Synthetic stock however could benefit from using accra glass and bedding the lugs.


All times are GMT -5. The time now is 05:12 AM.



LinkBacks Enabled by vBSEO 3.0.0 RC8