Bh 209

[turbohawk1]

Has anyone used BH209 with T/C Triumph? What load works the best?

[Muley]

90-110gr is the sweet spot for any gun.

[turbohawk1]

Thanks Muley. What kind of primers would you recommend?

[frontiergander]

i too would start off at 90 and work your way up.

I use CCI 209 Magnums, the TC's though i hear are cleaner using the Winchester W209 primers.

Carry an 1/8" drill bit with you as well and clean the flash channel out after 3 shots. That 1/8" channel gets clogged up pretty quickly with carbon so its important to keep it clean.

Thanks guys! Awesome info! This is all new to me.

[Hunting Man]

I like the CCI also for the TC and Knight. I had to clean the Knight breach hole but not the TC Triumph so for.

[daddus1]

turbohawk,
just remember that you must use standard or magnum primers not the 777 primers
daddus

[turbohawk1]

Thanks for the info. Now i have to get this scope on my triumph.

[frontiergander]

remember to use a lil bit of blue loc-tite on the mounting screws. Just a wee bit.

[Hunting Man]

Triumph will most likely like 100 gr BH 209, CCI mag primers, TC superglide sabots/250 gr shockwave bullets. This is a tight load in the TC but pretty accurate combination. FG suggests lapping the bore to polish out any areas in-order to ease up the loading pressure required. Congrats on the purchase of the best production line of ML rifles out there! While the Leupold rifleman scope that I installed on my Triumph is not a ML scope I had it and it was new and I think I will get many years of service from it. Time will tell. I still think a 3x9x40 scope is more than ever fully justified for the new long range shooting ML rifles. Again congrats!