Deer Hunting Forums

Deer Hunting Forums (http://www.deerhuntersclub.com/forums/)
-   MuzzleLoader Hunting (http://www.deerhuntersclub.com/forums/muzzleloader-hunting/)
-   -   T/C (http://www.deerhuntersclub.com/forums/muzzleloader-hunting/7398-t-c.html)

turbohawk1 03-12-2011 09:22 PM

T/C
 
Was checking out dicks and gander today, TC impact for 199.99 at dicks. What you guys think. Should i spend the exta money on the omega. I'm buying by the end of this month. Thanks for all the help!!!

BruceBruce1959 03-13-2011 08:01 AM

I'd choose the Impact over the Omega, You'll be much happier with the Break open action on the Impact when it's time to clean the weapon.

Muley 03-13-2011 11:09 AM

I don't understand this? I've had an Accura V2, two Optimas, and a Vortek UL. All break open actions.

I find my Omega easier to clean.

You should read about disassembling the Impact. Hardly easy to clean.

There's more to cleaning a gun than running a patch down the bore.

Hunting Man 03-13-2011 03:25 PM

I have not stayed up to speed on the latest models. Muley, I agree, nothing is easy to clean if it's done right.

BruceBruce1959 03-13-2011 04:02 PM

I agree also but I think the break open offers a slight advantage especially in the field.

frontiergander 03-13-2011 04:11 PM

only thing i ever have to clean is the bore and breech plug on my break actions.

Muley 03-13-2011 04:46 PM

It's nice to clean and lube the trigger now and then FG.

Even cleaning the bore is easier on the Omega, because it stays in line with the stock.

I've read you say the Omega is hard to clean. What is the hard part?

frontiergander 03-13-2011 04:55 PM

cleaned it 3 months ago with gun scrubber and relubed with barricade. I dont like to use thick gobby oil as it seems to attract dirt and other nasty stuff.

What i hated about the drop actions was having to remove the barrel every time just to clean the trigger mech due to the blow by. Priming with a scope on i found to be another pain.

Greatest deals i ever come across for cleaning a rifle. Heck i even use it when i am customizing a wood stock. My GRP was basically rebuilt on top of it LOL.
http://i293.photobucket.com/albums/m...000_0957-1.jpg

Muley 03-13-2011 05:15 PM

Funny you should show that picture. A perfect example of having the stock and barrel in the normal position to clean is easier.:bye:

Not sure what you were using for powder, but my trigger stays completely clean. I haven't touched it since I lubed it when I bought the gun.

Removing the barrel doesn't take anymore time than your barrel (15 sec for me). You do remove your barrel to clean and lube your barrel pivot point don't you?

Hard to put primers in? Stop talking like an old lady. It's not hard.

Why don't you mention the best breech plug design in the industry? I can shoot BH 209 with a ML primer. (Rem Kleanbore)

Face it FG. CVA has you by the nuts. It's not the best inline available.

Ok...your turn.

frontiergander 03-13-2011 05:23 PM

rarely remove the barrel for cleaning. I just add a bit of oiling now to the sidewalls of the frame.

I dont get any blowby and therefore, nothing for me to clean.

No one has me by the nuts, not even a woman!


All times are GMT -5. The time now is 05:03 AM.



LinkBacks Enabled by vBSEO 3.0.0 RC8