sighting in my muzzleloader with 4 different bullts - Deer Hunting Forums

Go Back   Deer Hunting Forums > General Forums > MuzzleLoader Hunting
MuzzleLoader Hunting Discuss MuzzleLoader topics

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1 (permalink)  
Old 10-02-2008, 10:36 PM
KTL's Avatar
KTL KTL is offline
B&C 100 Class
 
Join Date: Aug 2008
Location: Holt, Michigan
Posts: 195
Default sighting in my muzzleloader with 4 different bullts

I finally got a chance to do some shooting with my T/C .50 Omega. I went the rifle range with this in mind, to try numerous bullets and different grain charses to see what shot the best from my gun. I bought a new bullet this year to from Hornady, the FPB 350 grain to try. Also, 250 grain Hornady SST, 245 grain Powerbelts and 250 Shockwave (which I have been shooting for a couple of years). I am using American Pioneer powder instead of pellets. Ever since I had this gun I have had a hard time loading the Shockwave bullets. Yes, I run a wet patch down (presaturated with T/C #13 bore butter) then a dry patch between shots. I talked to the folks at T/C Arms about the problem loading these bullets and they said they have had other customers complain of the same problem. T/C Arms recomended rubbing a little bore butter on the rim of the sabots to ease in loading and said it wouln't effect accuracy. I shot from a benchrest at 50 yards and 100 yards.
Well, the 350 grain Hornady bullets did not load that easy, pushing them down with my ramrod wasn't smooth. There was a hesitatation every 3-5 inches of bullet travel (was the bullet spinning in the rifleling twist) not sure what made the bullet almost drag down the barrel. Also, 5 out of 6 of the bullets polymer tips were stuck in the end of my ramrod after I seated the bullet and pulled the ramrod back out. This bullet now became a hollow point.
The 250 grain Powerbelt were all over the board. I could not get any accuracy out of them.
The 250 grain Shockwave and 250 grain Hornady SST were awesome. The Hornady SST were the easiest to load and a little bore butter on the Shockwaves helped alot. At 50 yards I was able to get a 3 shot group to to darn near look like a 3 leaf clover!!! At 100 yards my groups were the size of a softball. Very satisfied.
I shot 100, 110, and 125 grain and it did not seem to have any effect on accuracy at 50 yards. I ran out of time to try different powder grains at 100 yards so I will be going back to the range.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Top Posters
Hunting Man7709
buckfever5650
BruceBruce19595427
timberghost3916
joel the signman3608
tator3185
gfdeputy22879
delbert1514
Buckshot1219
hunt NH1203
Photos
pictures
huntr-
pictures
Team DHC Articles


    All times are GMT -5. The time now is 11:33 PM.



    LinkBacks Enabled by vBSEO 3.0.0 RC8