Breech plug issues - Deer Hunting Forums

Go Back   Deer Hunting Forums > General Forums > MuzzleLoader Hunting
MuzzleLoader Hunting Discuss MuzzleLoader topics

Reply
 
Thread Tools Display Modes
  #1 (permalink)  
Old 10-18-2012, 08:50 AM
findmeoutside findmeoutside is offline
B&C 100 Class
 
Join Date: Oct 2012
Posts: 33
Default Breech plug issues

hey guys have a question went to clean my muzzleloader last night its a CVA Wolf nothing special but shoots well when working... pulled the breech plug and firing pin to clean both i know firing pin is not a common spot to clean but i have had issues with this sticking... i now cannot get the breech plug to thread back in i believe i may have boogered the threads a little... any idea on whether i can actually get a tap and tap this or does it have to go to a gunsmith??
Reply With Quote
  #2 (permalink)  
Old 10-22-2012, 08:45 AM
chuck67207 chuck67207 is offline
Scrub Buck
 
Join Date: Jan 2011
Location: kansas
Posts: 10
Default

you can get a tap and chase the threads as long as the threads are the same. but as far as cutting the threads i would not advise it. just made sure the threads are the same and you should be fine. my wolf was sticking also i pulled apart the fireing pin cleaned it and lube it up now its fine they do get dirty. hope this helps.
Reply With Quote
  #3 (permalink)  
Old 10-22-2012, 04:15 PM
findmeoutside findmeoutside is offline
B&C 100 Class
 
Join Date: Oct 2012
Posts: 33
Default

thank you that is exactly what i was thinking just wanted someone elses thoughts before i did it. i will definitely match the tap to the breech plug. yea that was my first experience with the firing pin but that will become a new part of my routine when cleaning now. thanks!
Reply With Quote
  #4 (permalink)  
Old 10-22-2012, 05:37 PM
deerless deerless is offline
B&C 120 Class
 
Join Date: Oct 2008
Location: Rhode Island
Posts: 394
Default

A thread file is best if you just need to clean up things a little. A tap WILL cut if sent in the hole if it was not the same dim. as the original tool that made the threads. I will make a guess but I figure barrel manfacturers are producing threads in a CNC lathe and not with a tap. Far more control over dimensions and better quality. Good luck....
Reply With Quote
  #5 (permalink)  
Old 10-22-2012, 09:59 PM
frontiergander frontiergander is offline
Banned
 
Join Date: Jul 2010
Location: Boncarbo, Colorado
Posts: 611
Default

i have a tap in the shop i will let you know what size it is. I want to say 5/8x3/4 but i will check first for you.
Reply With Quote
  #6 (permalink)  
Old 10-23-2012, 07:57 AM
findmeoutside findmeoutside is offline
B&C 100 Class
 
Join Date: Oct 2012
Posts: 33
Default

deerless- yea i am sure they are using a CNC machine to cut the threads as well. i am only looking to match the size and thread pattern and chase the threads not to actually thread a barrel. a file was my first thought but due to the threads being down in the barrel about 3/4" i cannot get to the top starter thread well enoungh to straighten it out with a file which is why i decided i should try and chase the threads with a tap.

FrontierGander- thank you i was thinking that as well i have not tried to match this up yet cause i have been out of town on a job not at my shop but i will either tonight or tomorrow night when i return home.

thanks for the information guys!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Top Posters
Hunting Man7768
buckfever5650
BruceBruce19595471
timberghost3929
joel the signman3608
tator3192
gfdeputy22941
delbert1518
Buckshot1219
hunt NH1203
Photos
Big Bucks of Ricks/and other critters
Rick Smith
Big Bucks of Ricks/and other critters
Team DHC Articles


    All times are GMT -5. The time now is 12:43 AM.



    LinkBacks Enabled by vBSEO 3.0.0 RC8