Hydro Dip Coatings For Guns - Deer Hunting Forums

Go Back   Deer Hunting Forums > General Forums > The Campfire
The Campfire Got something besides hunting on your mind? Discuss anything "off topic" around the campfire.

Reply
 
Thread Tools Display Modes
  #1 (permalink)  
Old 01-31-2012, 07:31 PM
BoneCollector780 BoneCollector780 is offline
Scrub Buck
 
Join Date: Jan 2012
Posts: 16
Default Hydro Dip Coatings For Guns

So i Have been looking into this Hydro Dipping or Hydro Printing process as a coating for gun stocks and gun barrels and other misc parts... i was wondering if anyone has used this process and how durable the coating is.

there are professional companies that you can send it out to get it done for you and there are also DIY kits that you can get for around $100.00 on line... which seems like a good deal because it comes with a ton of the material and all the supplies (scuff pad etching primer and clear coat) and safety gear but the only down side to that is you are stuck with one pattern.

Thats totally fine if you want everything in your life to be Mossy Oak break up... but to get a few different parts done in different patterns it would be more practical to just get it sent out to get it professionally done.

Has anyone done this themselves or gotten their parts sent out? what are your opinions? does it hold up to the every day wear and tear?

Thinking about getting my Ruger 10/22 stock and the polymer frame on my pistol.
Reply With Quote
  #2 (permalink)  
Old 01-31-2012, 08:38 PM
on_the_fly's Avatar
on_the_fly on_the_fly is offline
B&C 140 Class
 
Join Date: Dec 2008
Location: breck co. KY
Posts: 763
Default

I bought the stuff to do it and I've posted about it on here as well before I did as well. I bought my film and activator off eBay but the " mydipkit" is probable a better route to go. But even then you could still buy different film patterns off eBay. I found out fast water temp and clean water for next dip is extremely important.
Reply With Quote
  #3 (permalink)  
Old 01-31-2012, 08:51 PM
BoneCollector780 BoneCollector780 is offline
Scrub Buck
 
Join Date: Jan 2012
Posts: 16
Default Hydro dip

Thanks on the fly... i watched a few videos on youtube about doing it but i figured id try it on something a little less pricey than a gun stock or barrel...

one of the videos i watched the guy did like a picture frame and outlet covers and a tackle box

i will remember your tips and hints... thanks for the info... from what i have seen it is a very tricky process when it comes to water temp... air bubbles... and too much or too little activator.
Reply With Quote
  #4 (permalink)  
Old 01-31-2012, 08:52 PM
Hellbilly's Avatar
Hellbilly Hellbilly is offline
B&C 140 Class
 
Join Date: Jun 2010
Location: Citra,Fl
Posts: 885
Default

I picked up a sig P226 and put desert digital camo grips on it.Now I want to do the slide to match.I talked to a few guys that have done the film dip. So I got to checking around and a friend told me about duracoat. much better for guns that go to the woods and anything with moving parts. Check it out at duracoat.com, lots of patterns
__________________
Born on a mountain raised in a cave huntin and fishin is all I crave
Reply With Quote
  #5 (permalink)  
Old 01-31-2012, 09:40 PM
on_the_fly's Avatar
on_the_fly on_the_fly is offline
B&C 140 Class
 
Join Date: Dec 2008
Location: breck co. KY
Posts: 763
Default

Yeah if you don't get enough activator on the film it will not fully liquefy the film back to ink and if too much activator it puts holes in the film and is useless to dip. And this prosses is plenty strong for guns but you have to clear coat with a matted Finnish. Another big part is after you dip what ever it is, you must rinse off untill all the slime coat is gone.
Reply With Quote
  #6 (permalink)  
Old 02-01-2012, 05:07 PM
BoneCollector780 BoneCollector780 is offline
Scrub Buck
 
Join Date: Jan 2012
Posts: 16
Default Hydro dip

I think what i am gonna end up doing is getting it hydro dipped then seeing if i can get a Duracoat clear coat to put over the hydro dip to protect the finish since the Duracoat is a 2 part epoxy based product it will be the best of both both worlds.
Reply With Quote
  #7 (permalink)  
Old 02-01-2012, 08:25 PM
BoneCollector780 BoneCollector780 is offline
Scrub Buck
 
Join Date: Jan 2012
Posts: 16
Default Other question

I forgot to include this one into my original post... Is it better to coat a synthetic stock or can you coat wooden parts as well... the reason i ask is because my 10/22 i just picked up has a hardwood stock that i wanted to get hydro dipped.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Top Posters
Hunting Man7637
buckfever5650
BruceBruce19595396
timberghost3909
joel the signman3608
tator3165
gfdeputy22794
delbert1492
Buckshot1219
hunt NH1203
Photos
Slammer Hunting Innovations Products
slammerhi
Slammer Hunting Innovations Products
Team DHC Articles


    All times are GMT -5. The time now is 03:33 PM.



    LinkBacks Enabled by vBSEO 3.0.0 RC8