Deer Hunting Forums - View Single Post - Breech plug issues
View Single Post
  #2 (permalink)  
Old 10-22-2012, 08:45 AM
chuck67207 chuck67207 is offline
Scrub Buck
Join Date: Jan 2011
Location: kansas
Posts: 10

you can get a tap and chase the threads as long as the threads are the same. but as far as cutting the threads i would not advise it. just made sure the threads are the same and you should be fine. my wolf was sticking also i pulled apart the fireing pin cleaned it and lube it up now its fine they do get dirty. hope this helps.
Reply With Quote