Deer Hunting Forums - View Single Post - need input
Thread: need input
View Single Post
  #7 (permalink)  
Old 11-02-2010, 09:18 AM
goose19726 goose19726 is offline
B&C 100 Class
 
Join Date: Oct 2010
Location: currently in oklahoma city, soon I will be moving to little axe oklahoma
Posts: 37
Default

can't think of why it would not work, I use an old government issue steel and formica desk (mounting the presses was a pain in the backside but once done, it works pretty good. I have a friend that uses an old wooded door set on cinder blocks. as long as it is stable, it will work. my desk is a little light and the force I use to resize brass would make it tip a little, so I drilled a hole at the back and mounted an eye bolt facing down, filled a 5 gallon bucket with cement and put a thin cable that was tack welded on one end to a piece of steel at the bottom under the cement, the other end of the cable is cinched up to the eye bolt, the desk has not moved since. I have an old lee single stage and a lee progressive mounted to it
Reply With Quote